Caging Mechanism for a drag-free satellite position sensor

A disturbance compensation system for satellites based on the drag-free concept was mechanized and flown, using a spherical proof mass and a cam-guided caging mechanism. The caging mechanism controls the location of the proof mass for testing and constrains it during launch. Design requirements, design details, and hardware are described

“The Brooding Spirit of the Law”: Supreme Court Justices Reading Dissents from the Bench

In rare instances, a Supreme Court justice may elect to call attention to his or her displeasure with a majority decision by reading a dissenting opinion from the bench. We document this phenomenon by constructing a data set from audio files of Court proceedings and news accounts. We then test a model explaining why justices use this practice selectively by analyzing ideological, strategic, and institutional variables. Judicial review, formal alteration of precedent, size of majority coalition, and issue area influence this behavior. Ideological distance between the dissenter and majority opinion writer produces a counterintuitive relationship. We suspect that reading a dissent is an action selectively undertaken when bargaining and accommodation among ideologically proximate justices has broken down irreparably

Single-level degenerative cervical disc disease and driving disability: Results from a prospective, randomized trial

Study Design Post hoc analysis of prospective, randomized trial. Objective To investigate the disability associated with driving and single-level degenerative, cervical disc disease and to investigate the effect of surgery on driving disability. Methods Post hoc analysis of data obtained from three sites participating in a multicenter, randomized, controlled trial comparing cervical disc arthroplasty (TDA) with anterior cervical discectomy and fusion (ACDF). The driving subscale of the Neck Disability Index (NDI) was analyzed for all patients. A dichotomous severity score was created from the NDI. Statistical comparisons were made within and between groups. Results Two-year follow-up was available for 118/135 (87%) patients. One half of the study population (49.6%) reported moderate or severe preoperative driving difficulty. This disability associated with driving was similar among the two groups (ACDF: 2.5 ± 1.1, TDA: 2.6 ± 1.0, p = 0.646). The majority of patients showed improvement, with no or little driving disability, at the sixth postoperative week (ACDF: 75%, TDA: 90%, p = 0.073). At no follow-up point did a difference exist between groups according to the severity index. Conclusions Many patients suffering from radiculopathy or myelopathy from cervical disc disease are limited in their ability to operate an automobile. Following anterior cervical spine surgery, most patients are able to return to comfortable driving at 6 weeks

Grazing Behaviour of Dorper Sheep and Farmed Goats and Their Implications for Natural Resource Management in Western NSW

The introduction of exotic herbivores into the semi-arid and arid zones of Australia resulted in dramatic change in the native vegetation (e.g. Noble and Tongway 1986; Friedel et al. 1990). Overgrazing and trampling reduced ground cover and changed species composition from dominance by perennial grasses and shrubs to dominance by annual species over extensive areas (e.g. Gunn 1986), or assisted the encroachment of woody species (Wilcox and Cunningham 1994). It is particularly in this context that the recent introduction of new sheep breeds, reputedly hardier than traditional Merinos, and the increasing trend to farming or re-domestication of feral goats, poses serious questions for the ecological sustainability of the region. This ongoing project aims to combine information from laboratory experiments, field studies and producer experience to develop practical management strategies that are supportive of regional and national ground cover targets aimed at reducing wind erosion and maintaining biodiversity values. We report the preliminary results and recommend management strategies

Analysis of full-waveform LiDAR data for classification of an orange orchard scene

Full-waveform laser scanning data acquired with a Riegl LMS-Q560 instrument were used to classify an orange orchard into orange trees, grass and ground using waveform parameters alone. Gaussian decomposition was performed on this data capture from the National Airborne Field Experiment in November 2006 using a custom peak-detection procedure and a trust-region-reflective algorithm for fitting Gauss functions. Calibration was carried out using waveforms returned from a road surface, and the backscattering coefficient c was derived for every waveform peak. The processed data were then analysed according to the number of returns detected within each waveform and classified into three classes based on pulse width and c. For single-peak waveforms the scatterplot of c versus pulse width was used to distinguish between ground, grass and orange trees. In the case of multiple returns, the relationship between first (or first plus middle) and last return c values was used to separate ground from other targets. Refinement of this classification, and further sub-classification into grass and orange trees was performed using the c versus pulse width scatterplots of last returns. In all cases the separation was carried out using a decision tree with empirical relationships between the waveform parameters. Ground points were successfully separated from orange tree points. The most difficult class to separate and verify was grass, but those points in general corresponded well with the grass areas identified in the aerial photography. The overall accuracy reached 91%, using photography and relative elevation as ground truth. The overall accuracy for two classes, orange tree and combined class of grass and ground, yielded 95%. Finally, the backscattering coefficient c of single-peak waveforms was also used to derive reflectance values of the three classes. The reflectance of the orange tree class (0.31) and ground class (0.60) are consistent with published values at the wavelength of the Riegl scanner (1550 nm). The grass class reflectance (0.46) falls in between the other two classes as might be expected, as this class has a mixture of the contributions of both vegetation and ground reflectance properties

Delivering reform in English healthcare: an ideational perspective

A variety of perspectives has been put forward to understand reform across healthcare systems. Recently, some have called for these perspectives to give greater recognition to the role of ideational processes. The purpose of this article is to present an ideational approach to understanding the delivery of healthcare reform. It draws on a case of English healthcare reform – the Next Stage Review led by Lord Darzi – to show how the delivery of its reform proposals was associated with four ideational frames. These frames built on the idea of “progress” in responding to existing problems; the idea of “prevailing policy” in forming part of a bricolage of ideas within institutional contexts; the idea of “prescription” as top-down structural change at odds with local contexts; and the idea of “professional disputes” in challenging the notion of clinical engagement across professional groups. The article discusses the implications of these ideas in furthering our understanding of policy change, conflict and continuity across healthcare settings

UV/Ozone treatment to reduce metal-graphene contact resistance

We report reduced contact resistance of single-layer graphene devices by using ultraviolet ozone (UVO) treatment to modify the metal/graphene contact interface. The devices were fabricated from mechanically transferred, chemical vapor deposition (CVD) grown, single layer graphene. UVO treatment of graphene in the contact regions as defined by photolithography and prior to metal deposition was found to reduce interface contamination originating from incomplete removal of poly(methyl methacrylate) (PMMA) and photoresist. Our control experiment shows that exposure times up to 10 minutes did not introduce significant disorder in the graphene as characterized by Raman spectroscopy. By using the described approach, contact resistance of less than 200 {\Omega} {\mu}m was achieved, while not significantly altering the electrical properties of the graphene channel region of devices.Comment: 17 pages, 5 figure

Effective LAI and CHP of a single tree from small-footprint full-waveform LiDAR

This letter has tested the canopy height profile (CHP) methodology as a way of effective leaf area index (LAIe) and vertical vegetation profile retrieval at a single-tree level. Waveform and discrete airborne LiDAR data from six swaths, as well as from the combined data of six swaths, were used to extract the LAIe of a single live Callitris glaucophylla tree. LAIe was extracted from raw waveform as an intermediate step in the CHP methodology, with two different vegetation-ground reflectance ratios. Discrete point LAIe estimates were derived from the gap probability using the following: 1) single ground returns and 2) all ground returns. LiDAR LAIe retrievals were subsequently compared to hemispherical photography estimates, yielding mean values within ±7% of the latter, depending on the method used. The CHP of a single dead Callitris glaucophylla tree, representing the distribution of vegetation material, was verified with a field profile manually reconstructed from convergent photographs taken with a fixed-focal-length camera. A binwise comparison of the two profiles showed very high correlation between the data reaching R2 of 0.86 for the CHP from combined swaths. Using a study-area-adjusted reflectance ratio improved the correlation between the profiles, but only marginally in comparison to using an arbitrary ratio of 0.5 for the laser wavelength of 1550 nm